ZHIYUN Bowens Mount Adapter for X100&X60
$52.00
- OVERVIEW
- SPECS
- WHAT'S IN THE BOX
- COMPARISON
- FAQ
① Kwise until the reflector is engaged in the adapter and cannot be rotated.
② Align the end of the adapter with the 1/4" screw on top of the light stand, install the adapter to the light stand and tighten the adapter screw.
* Light stand is not provided.
* When attaching the adapter to a softbox with a Bowens mount, the diameter of the softbox should be equal to or less than 60cm and the weight should be equal to or less than 1.3kg.
Align the adapter mount with the ZHIYUN MOLUS X100 accessory mount, install the adapter to the X100 and rotate the adapter clockwise until you hear a click sound.
① Align the standard reflector mount with the adapter mount and install the standard reflector to the adapter.
② Rotate the standard reflector counterclockwise until the reflector is engaged in the adapter and cannot be rotated.
You can adjust the adapter angle if necessary and tighten the
adapter latch.
Removing the Adapter
Loosen the adapter screw and remove the adapter from the light stand.
① Press and hold in toward the right of the orange lock at the top of the adapter and rotate the standard reflector as shown in the image.
② Remove the reflector from the adapter.
① Press and hold the lock at the gap of the adapter as shown in the image while rotating MOLUS X100 clockwise.
② Remove the adapter from MOLUS X100.
